If you have questions about what the Stanley numbers are, you can
look the planes up on Blood&Gore:
https://www.supertool.com/StanleyBG/stan0.htm
Sometimes, emails to/from me are vectored to some cyber black
hole, never reaching their destination. I answer all emails, so if
you haven't heard from me, your/my email is likely having high tea
in said black hole, never to be heard from, so please try again.
Please email me prior to sending money so that you can be sure
the item is still up for grabs. Also, prices do not include shipping,
which is the amount that it takes to go from me to you via the US
Post Office.
This list goes out to many people, normally on the first of the
month (unless otherwise noted above). So, if you see something you
want, it's the quickest finger on the trigger that wins the duel.
Some folks become upset that they miss out on a tool. I wish I had
lots of this stuff many times over so I can satisfy the demand, but
that is normally not the case. Some of it does have duplicates here,
and if so, I will state that in my reply to you.
Also, due to the nature of selling over the wires, tools are sold
on a first come, first serve basis. The first person to say "I'll
take it", gets it. I have to operate this way as some will take a
few days to get back to me with their interest in a particular item,
and it's unfair to keep others waiting who are willing to buy the
item immediately.
I reserve the right to correct typographical errors after the list
goes out. I rarely make them, but when I do they can be major ones.
If you're the kind of person who puts a straightedge to the sole of
a #40, to check it for flatness, or who tosses a plane on a scale to
weigh it against what it states in the Stanley catalogs, you'll need
to take your business elsewhere. I'll wish you luck finding perfection
in something that was never made, nor intended to be, perfect. You guys
know who you are, and it's best for both of us that our paths not cross.
Remember, you don't have to be a connoisseur (did I spell that
correctly) to shop here. You can be a wirehead, a metalhead, a propeller-
head, a deadhead, a cokehead, or even a knuckle dragging oaf, just like
me, to shop here, as long as your dinero is green.
Thanks for shopping, and remember that no letters or words were
injured when writing this list...
FEATURED TOOL OF THE MONTH
******** **** ** *** *****
Likely unique Stanley Rule and Level Gage transitional plane
in its original box; Stanley purchased Gage's line of planes
that feature the ability to maintain the iron's set when it's
removed to hone; Sargent debuted its Auto Set design which
forced Stanley to react, the path of least resistance was to
produce Gage's time-tested design; Sargent's innovations had
a much greater impact on Stanley than most realize, notably
the flat side redesign of the Bed Rock line; from the earliest
days of Stanley's Gage acquisition, the box's label has no
model number, it appears that was to be scribbled on the label
later; inside is the No.4 size Gage made plane, as shown on
the label, it has no Stanley markings at all, Stanley likely
was selling off the finished Gage marked products that came
from the purchase; a true rarity, the box is fine, with minor
staining, the plane was used once or twice, the tote has a fine
hairline check due to shrinkage; a significant 'missing link'
during Stanley's history, I know of no other such Gage boxes
this early that are printed with Stanley Rule and Level prior
to The Stanley Works rebranding; Stanley did continue the
manufacture of Gage's wooden body planes as well as adding a
metallic line, both of which were marked with Stanley's logos:
https://www.supertool.com/forsale/may/f1.jpeg
https://www.supertool.com/forsale/may/f2.jpeg $1885.00
STANLEY
*******
ST1 #49 match plane; a clean and damage free worker in much nicer
than usual condition; the narrower of the two tongue and
groove planes, it's much less common than the #48; top:
https://www.supertool.com/forsale/may/t1.jpeg $165.00
ST2 #48 match plane; a perfect match to the previous plane,
it's the best selling metallic tongue and groove plane
made; little used and only in need of a honing; bottom:
https://www.supertool.com/forsale/may/t1.jpeg $135.00
ST3 Fillister bed for Miller Patents #41 and #42; a good ex-
ample, with attaching screws and spur; left:
https://www.supertool.com/forsale/may/t2.jpeg $290.00
ST4 Eight cutters for the Miller Patent planes including the
fillister cutter; several with original sheen, some dark,
stamped with widths along the edge; the fillister cutter
wants polishing on the face; right:
https://www.supertool.com/forsale/may/t2.jpeg $190.00
ST5 Bailey/Boston #56 spoke shave made prior to Stanley's
acquisition; with much longer handles, 2 5/8" wide cutter,
it was targeted at coopers, wheelwrights, and other trades
that need larger/stouter tools; in good as found condition;
top:
https://www.supertool.com/forsale/may/t3.jpeg $165.00
ST6 #85 1/2 rosewood panel gauge; a good worker that saw little
use, the scribe is full original length; handy for marking
a greater distance (from a trued edge) than standard gauges,
it's particularly useful for making edges parallel to each
other; top:
https://www.supertool.com/forsale/may/t4.jpeg $110.00
ST7 Pair of rosewood handle squares; an 8" #20 that has most
bluing on the graduated blade, some minor grime will quickly
clean; and a 6" #2 miter square with sweetheart logo, it
has grime, perhaps a shallow pit spot or two, it will clean
well; top left two:
https://www.supertool.com/forsale/may/t6.jpeg $45.00
ST8 #40 scrub plane; barely used, worthy of an original box,
99.9% glossy japanning, most decal remains on the tote,
it dates to the early 1930's, sweetheart iron; left:
https://www.supertool.com/forsale/may/t17.jpeg $155.00
ST9 Type 4 #4 smoothing plane; pre-lateral, the first production
after Stanley realized the type 3 'frog' was not the way to
successful planing; as found, dirty/grimy from sitting, all
original parts, no damage, the tote and knob are what was
used on type 2 and type 3 production; should clean to be a
good example; right:
https://www.supertool.com/forsale/may/t17.jpeg $135.00
ST10 #71 router in the original box; US made, all parts, it's
the pinnacle of the plane's design; a bit dusty from sitting,
box shows normal wear and tear; left:
https://www.supertool.com/forsale/may/t18.jpeg $150.00
ST11 Three clapboard tools; the #88 marking gauge that butts
against trim to scribe the clapboard, and two #89 clamps
to space and secure the clapboard to make nailing easier,
I wish I had these when I put up clapboards (in zero
degree weather!) on the ca.1800 house I dismantled and put
back up on another property; right three:
https://www.supertool.com/forsale/may/t18.jpeg $85.00
ST12 #278 low angle fillister; a very clean and barely used plane
that gets no respect, it's a handy tool for all sorts of
work, I used one recently to clean the tongues of T&G boards
I put up in the barn; complete and little used; top left:
https://www.supertool.com/forsale/may/t21.jpeg $185.00
ST13 #72 Razor-Edge japanned spoke shave; in fine worker shape,
like the previous, they get little respect, it's one of the
best spoke shave designs offered; bottom:
https://www.supertool.com/forsale/may/t21.jpeg $155.00
ST14 #602 Bed Rock smoothing plane; an early 1930's production
with the orange painted frog, original 'art work' that
Stanley did on all their Bailey and Bed Rock planes (and
some other tools) for a short time; sweetheart iron, dusty
from sitting, never mucked with, a chip at the base of the
knob; an honest plane, which can't be said for many others
that have been cobbled together; top:
https://www.supertool.com/forsale/may/t23.jpeg $785.00
ST15 #79 side rabbet; US made with the stop, nearly all the
plating remains; bottom:
https://www.supertool.com/forsale/may/t23.jpeg $80.00
ST16 Type 11 #4 1/2C corrugated oversize smoothing plane; as
found, grime from sitting, free of damage, all original
parts, it saw little use; left:
https://www.supertool.com/forsale/may/t24.jpeg $150.00
ST17 Type 13 #4 1/2 oversize smoothing plane with a great stripy
tote that the image fails to capture well; as found, all
original parts, little use, the base of the knob shows
stress cracks; this is a nice plane that will clean very
well; right:
https://www.supertool.com/forsale/may/t24.jpeg $160.00
ST18 #85 rabbet mouth scraper with tilting knob and tote; as
found with all original parts, including the unmarked iron
(which is often the case), it saw little use and will clean
very well; top:
https://www.supertool.com/forsale/may/t25.jpeg $375.00
ST19 #271 small router; US made, barely used, owner put his in-
itials (in ink) and painted the background of STANLEY as
his owner marks; bottom left:
https://www.supertool.com/forsale/may/t25.jpeg $65.00
ST20 #65 low angle block plane; free of damage, earlier production
with long machined bed, most finish remains, will benefit
from a clean; one of Stanley's best planes; bottom right:
https://www.supertool.com/forsale/may/t25.jpeg $75.00
ST21 #10 jack rabbet; UK production in the original box; saw
normal use, less costly, but as good, than the US model,
the lever cap is an earlier US "STANLEY" one; left:
https://www.supertool.com/forsale/may/t26.jpeg $130.00
ST22 #18 knuckle joint block plane in its original box; a 1920's
model in nearly new condition, it can be honed and used as
is; box all there, the cover has some seam separations, a
drop of white glue along those solves it quickly; right:
https://www.supertool.com/forsale/may/t26.jpeg $110.00
ST23 #605 1/4 Bed Rock junior jack plane; a bargain worker as
the right cheek cracked and was neatly braised; and so the
casting crack doesn't feel lonesome, the base of the tote
is also cracked; a fine worker as is; top:
https://www.supertool.com/forsale/may/t27.jpeg $185.00
ST24 #97 chisel plane; a worker with the common small, and in-
consequential chip at a corner; bit dirty from sitting, it
will clean well and work as well as a mint one; earlier
production; bottom:
https://www.supertool.com/forsale/may/t27.jpeg $210.00
ST25 #604C Bed Rock corrugated smoothing plane; a very clean
example, embossed with two patent dates, BED ROCK lever
cap, sweetheart iron, the tote is an early 1930's replace-
ment with label; much nicer than what's normally found;
top:
https://www.supertool.com/forsale/may/t31.jpeg $235.00
ST26 Same as previous, but a #603C Bed Rock corrugated smoothing
plane of the same vintage, with earlier sweetheart logo
iron; also much nicer than usual; bottom:
https://www.supertool.com/forsale/may/t31.jpeg $245.00
ST27 #605 1/2 Bed Rock oversize jack plane; two patent dates,
BED ROCK lever cap, V-logo iron, tote is early 1930's re-
placement with label; a very clean one; top:
https://www.supertool.com/forsale/may/t32.jpeg $275.00
ST28 #604 1/2C Bed Rock corrugated oversize smoothing plane; with
single patent date, Stanley lever cap, sweetheart logo iron,
tote with label, a very nice example; bottom:
https://www.supertool.com/forsale/may/t32.jpeg $355.00
ST29 #238 plough plane with its full set of cutters; clean, free
of damage, a plane normally found with a single cutter; the
plane is photographed with an iron it, that belongs to
another set of cutters (for another plane not on the list),
you'll receive the seven below it; left:
https://www.supertool.com/forsale/may/t33.jpeg $185.00
ST30 #39 3/4" dado; little used, free of damage, all original
parts, dusty from sitting; right:
https://www.supertool.com/forsale/may/t33.jpeg $150.00
ST31 #72 in its original box with picture label; ca.1930, with
its bull nose casting, if it was used, it was once; one
for the collectors:
https://www.supertool.com/forsale/may/t34.jpeg $585.00
ST32 #10 1/2 smooth rabbet in its original box; 1930's production,
it saw careful use, some tarnish spots developed while
sitting idle; picture label, Stanley would use forgotten
labels when they stumbled over them:
https://www.supertool.com/forsale/may/t35.jpeg $290.00
ST33 #12 cabinet scraper in its original box; looks unused, the
sweetheart marked cutter is in its original wrapping; picture
label, cover shows staining:
https://www.supertool.com/forsale/may/t36.jpeg $285.00
ST34 #112 cabinet scraper in the original box; carefully used a
couple times, original cutter shows some storage tarnish,
picture label; uncommon to find this plane in the box:
https://www.supertool.com/forsale/may/t37.jpeg $335.00
ST35 Extremely rare #135 smoothing plane in the original green
box; ca.1895, "S" casting, used once or twice, it was put
back in its box after use; box has nylon tape (fortunately
not over the label) and some staining on the cover, but
beggars can't be choosers for something so rare; I've had
success using a hair drier to remove tape, it may work on
this, but it will take time and care, you can try it on the
inside of the box's bottom as the tape is there, too:
https://www.supertool.com/forsale/may/t38.jpeg $490.00
ST36 Another rare boxed plane, the #171 door trim (router) plane
complete with pamphlet and cutters with their original
envelope; cover has paper tape inside, some scattered paint
spots on the label, pamphlet has some cover tears:
https://www.supertool.com/forsale/may/t39.jpeg $795.00
ST37 #444 dovetail plane in the original chestnut box; complete,
with everything but the screw driver that shipped with it;
little used, nicer than what's normally found, the cover
was split and glued, some label loss (also on cutter case):
https://www.supertool.com/forsale/may/t40.jpeg $975.00
ST38 #5 1/2C corrugated oversize jack plane; mid-1920's with
sweetheart iron and tall knob; as found, dirty, it will
clean well; tote has fine crack and was glued; a fine
worker; top:
https://www.supertool.com/forsale/may/t41.jpeg $130.00
ST39 #5 1/2 oversize jack plane; a type 12, like the previous,
much cleaner, little used, free of damage, glossy finish,
a very nice example; bottom:
https://www.supertool.com/forsale/may/t41.jpeg $160.00
ST40 #2 smoothing plane; dusty, a fine worker, early 1930's pro-
duction, tote's horn has a hint of roughness; top:
https://www.supertool.com/forsale/may/t52.jpeg $210.00
ST41 #605C Bed Rock corrugated jack plane; two patent dates and
BED ROCK lever cap, it has an early 1930's tote with the
label; much nicer than usual condition, a fine worker;
top:
https://www.supertool.com/forsale/may/t58.jpeg $155.00
ST42 Four #720 bevel edge chisels; all as found and sound workers
with proper handles (some replaced and/or loss of finish);
1/4", 1/2", 3/4", and 1 1/4"; just the 1/2" has the model
number stamped in the socket, all are definitely the #720
model; will clean easily to look better; bottom four:
https://www.supertool.com/forsale/may/t58.jpeg $145.00
ST43 #604C Bed Rock corrugated smoothing plane; earlier round
side model with '92 patent date iron and three line logo;
a good example that saw limited use; top:
https://www.supertool.com/forsale/may/t60.jpeg $145.00
ST44 #603C Bed Rock corrugated smoothing plane; earlier round
side model with four line logo and three line lever cap;
it saw little use; bottom:
https://www.supertool.com/forsale/may/t60.jpeg $165.00
ST45 #605 1/2C Bed Rock corrugated smoothing plane; earlier
round side model with uncommon "Stanley Rule And Level Co."
iron and three line lever cap; japanning loss at toe and
heel, still nicer than what's normally found; top:
https://www.supertool.com/forsale/may/t61.jpeg $175.00
ST46 #605 Bed Rock jack plane; earlier round side model with
'92 patent iron and three line lever cap; little used
with minor japanning loss; bottom:
https://www.supertool.com/forsale/may/t61.jpeg $145.00
ST47 #604 1/2 Bed Rock oversize smoothing plane; earlier round
side model with four line logo iron and two line lever
cap; a nice example that saw little use; top:
https://www.supertool.com/forsale/may/t62.jpeg $190.00
ST48 #80 cabinet scraper; showing normal signs of use with plenty
more left in it, it's a very popular and easy to use tool;
bottom:
https://www.supertool.com/forsale/may/t62.jpeg $55.00
ST49 #122 Liberty Bell smoothing plane; cleaner than what's
normally found, all original parts; uncommon "STANLEY"
stamped iron, these are normally in road-kill condition,
this one managed to look both ways prior to crossing the
road; left:
https://www.supertool.com/forsale/may/t63.jpeg $75.00
ST50 Early solid nut #22 transitional plane; from the early days
of Stanley, it has the solid back lever cap; all original
parts, as found, it didn't see much use and will clean very
well; the early transitionals are difficult to find and when
so are close to only useful to burn condition; right:
https://www.supertool.com/forsale/may/t63.jpeg $120.00
ST51 #63 curved sole spoke shave; 1920's production, all four
original parts, 1 1/2" wide cutter, a good as found
worker with minor japanning loss; bottom:
https://www.supertool.com/forsale/may/t69.jpeg $40.00
ST52 #20 circular plane; an as found worker for curved surfaces,
it will clean well; '92 patent iron, the lever cap is a
later ca.1930 Stanley replacement; the most popular design
that was perfected well over 125 years ago; top left:
https://www.supertool.com/forsale/may/t72.jpeg $120.00
ST53 Clean and barely used type type 13 #4C corrugated smoothing
plane; all original parts, tote has near full decal, the
plane is a bit dusty from sitting in a shop, it can be
honed and used as is; top left:
https://www.supertool.com/forsale/may/t74.jpeg $135.00
ST54 #42 saw set; a sound worker with strong spring, nearly all
finish remains; a very popular model for setting common
crosscut and rip saws; top right:
https://www.supertool.com/forsale/may/t74.jpeg $45.00
ST55 #66 beader with both fences and with six cutters, four ori-
ginal, including the router; nickel plated model, most of
that remains, some normal grime/tarnish from sitting;
bottom:
https://www.supertool.com/forsale/may/t74.jpeg $115.00
ST56 #45 combination plane in its original hinged wooden box
that was offered during the 1920's; complete, little used,
extra spur, a fine worker:
https://www.supertool.com/forsale/may/t75.jpeg $290.00
ST57 #602 Bed Rock smoothing plane; early model with round sides,
it's much less common than the later production; embossed
three line lever cap, '92 patent iron, never mucked with,
a good example; top left:
https://www.supertool.com/forsale/may/t76.jpeg $955.00
ST58 #140 combination rabbet block plane; all original parts,
dates to the 1920's, as found, will easily clean well; a
handy plane that has lots of uses; top right:
https://www.supertool.com/forsale/may/t76.jpeg $120.00
ST59 #289 fillister/rabbet; the best model with the three lobe
spurs, the same used on the #45, #78, etc., they work better
than the original single spur; all original parts, as found
with light grime that will clean; one of Stanley's best
planes, you'll see 100 old style spur model for every later
model; top:
https://www.supertool.com/forsale/may/t77.jpeg $295.00
ST60 20 cutters for the #66 beader; unused, they are custom pro-
files that Stanley forgot to make; roughly 25 years ago a
small run was made, no more will be made from the source:
https://www.supertool.com/forsale/may/t81.jpeg $130.00
ST61 Pair of later Stanley block planes; made in England, long
after US production ceased, they are the #9 1/2 and the low
angle #60 1/2; barely used, more mass than the originals,
they have the same features as the older ones; top two:
https://www.supertool.com/forsale/may/t82.jpeg $75.00
ST62 #82 rosewood Razor-Edge spoke shave; clean, free of damage,
little used, one of the best shave designs offered, the set
and mouth can easily be changed; bottom:
https://www.supertool.com/forsale/may/t82.jpeg $165.00
ST63 #82 rosewood sole scraper; most plating remains, the cutter
is a good replacement, longer than what was originally
supplied, it saw little use; top right:
https://www.supertool.com/forsale/may/t83a.jpeg $60.00
ST64 #94 cabinetmaker's large rabbet plane; an uncommon model,
it's the largest offered, I found more of these in England
than here in the US; nearly all plating remains, V-logo in
disk at nose, it saw barely any use; these are usually
found damaged, this one escaped that, it's worthy of a
collection or as one used with care; bottom:
https://www.supertool.com/forsale/may/t83a.jpeg $325.00
ST65 #984 corner brace; barely used, all the full features offered
on Stanley's best braces, it's ready to use; top left:
https://www.supertool.com/forsale/may/t84.jpeg $110.00
ST66 Uncommon #610 pistol grip eggbeater drill; never offered as
a single tool, these were supplied with some of the tool
sets offered during the 1920's and 1930's; clean, most of
the original finish; bottom:
https://www.supertool.com/forsale/may/t84.jpeg $130.00
ST67 Pair of #750 bevel edge paring chisels; both stamped with
model number and barely used, widths of 1/4" and 3/4", one
with original handle, other without; each can be honed and
used as is; middle two:
https://www.supertool.com/forsale/may/t85.jpeg $65.00
ST68 Reproduction from an original 1920s Stanley Bailey Plane
poster; likely the lone survivor, it was found in 2015 after
spending decades hidden behind a shelf in a Wisconsin base-
ment; printed on a Heidelberg offset printer, using hand-
mixed inks and the highest possible paper stock, it's 19"
by 28", signed and numbered by the fellow who reproduced
it, US shipping postage is included in the price:
https://www.supertool.com/forsale/may/t100.jpg $28.00
WOOD PLANES
**** ******
WP1 5/8" ogee by J.Haw/Bristol; uncommon size, as found, dry
surface, owner mark, will make a fine worker:
https://www.supertool.com/forsale/may/t14.jpeg $95.00
WP2 3/4" quirk ovolo by D.M.Shepard; good proportions, little
used, original surface, crack in boxing well back from the
mouth:
https://www.supertool.com/forsale/may/t15.jpeg $115.00
WP3 Mander's March 24, 1885 patent chamfer plane; stamped with
his name, as well as an assignee, Dillin, Mander was an
Englishman who had the bright idea of patenting the common
English box chamfer plane here in America; kinda sorta works
like the #72, a metallic 'box' is slid up/down within the
beech stock to set the working width; in sound shape, patent
date stamped below names; top right:
https://www.supertool.com/forsale/may/t16.jpeg $185.00
WP4 Pair of side rabbets by Higgs; free of modification, fine
mouths, cut left and right, owner initials, a solid pair;
bottom:
https://www.supertool.com/forsale/may/t47.jpeg $120.00
WP5 Pair of #2 hollow and round planes by Eastwood/York; as
found, cleaned, free of alteration, the round's iron is
blah, a replacement is included, it needs some grinding
which is easy to do on a round iron; top left pair:
https://www.supertool.com/forsale/may/t48.jpeg $65.00
WP6 Pair of #6 hollow and round planes by Eastwood/York; skewed
irons, nicely cleaned, owner marks are different, but these
planes have always been together; top right pair:
https://www.supertool.com/forsale/may/t48.jpeg $85.00
WP7 Pair of #10 hollow and round planes by Eastwood/York; skewed
irons, nicely cleaned, owner marks; face of irons want a
polishing; bottom pair:
https://www.supertool.com/forsale/may/t48.jpeg $90.00
WP8 Early 1" cove and astragal with 18th century style wedge,
broad round chamfers, it's ca.1800; very well made, little
used, no maker/owner mark, the astragal is smaller than
typical for this profile; a nice plane top left:
https://www.supertool.com/forsale/may/t57.jpeg
https://www.supertool.com/forsale/may/t57a.jpeg $120.00
WP9 1/8" bead by Ohio Tool Co.; as found, free of damage, owner
mark, a subtle detail to remove a sharp corner/edge; top
right:
https://www.supertool.com/forsale/may/t57.jpeg $85.00
WP10 7/8" match planes by Kennedy/Hartford; as found and will
benefit from a clean, which they will do well, they cut the
tongue and groove joints in 3/4" to 1" thick stock, the #48
is the metallic version of these planes; one with a few
long inactive worm holes; left two:
https://www.supertool.com/forsale/may/t64.jpeg $70.00
WP11 Adjustable panel raiser by Malloch&Sons/Perth; the UK style
that's roughly the size of a wooden smoothing plane, it's
fit with a double iron and has an adjustable fence; as found
and free of alteration, with owner mark, will make a fine
worker; right:
https://www.supertool.com/forsale/may/t64.jpeg $155.00
WP12 1/2" quirk ogee with great proportions; no maker mark but
professionally made, owner mark, refinished, it will make
a fine worker:
https://www.supertool.com/forsale/may/t65.jpeg $115.00
WP13 7/8" bolection by R.Carter/Troy; from Norm Vandal's shop,
never abused, little used with original inking on heel,
owner mark; a fine example:
https://www.supertool.com/forsale/may/t66.jpeg $135.00
WP14 Moving fillister retailed by Holtzapffel, a business that
sold only the best products, wooden planes stamped thus
are not common; used to cut various width rabbets with its
adjustable fence, it has a fully boxed shoulder and nicker
with a boxwood wedge, the brass screwed stop is steel plated
so the brass doesn't leave oxidation marks; nicely cleaned,
owner mark, it can be honed and used as is; top:
https://www.supertool.com/forsale/may/t67.jpeg $165.00
WP15 I.Lindenberger 1/2" quirk ogee; 10" yellow birch body and
wedge, flat chamfers, refinished with some minor staining,
it has his mile long stamp that's deep and legible, the
quirk is boxed, which is uncommon for planes of this era:
https://www.supertool.com/forsale/may/t73.jpeg $165.00
MISCELLANEOUS
*************
MS1 Pair of quality ball peen hammers; both in fine worker shape,
a Pascal with 2 3/4" forging, most original paint remains on
the handle; and a Cheney with 2" forging, it also has most of
its original finish; both ready to bang; bottom left two:
https://www.supertool.com/forsale/may/t3.jpeg $90.00
MS2 Three (only two pictured) Lie-Nielsen screw drivers with
figured maples handles; a split nut, a reamer (not in the
image), and a 10" slender one; each barely used; no longer
available in figured maple; bottom middle:
https://www.supertool.com/forsale/may/t3.jpeg $140.00
MS3 Pair of screw drivers; a good Perfect Handle by H.D.Smith
and a Crescent patented one with handle that is arranged
standard or crosswise to the blade, one end of the handle
can function as a hammer; both 100% usable as is, the latter
has some plating loss; bottom right:
https://www.supertool.com/forsale/may/t3.jpeg $110.00
MS4 Upholsterer's hammer with wooden grips, no maker mark but
likely Osborne; a worker that can be used as is, some
chipping within the claw; middle:
https://www.supertool.com/forsale/may/t4.jpeg $55.00
MS5 6" drawknife with splayed forging; identical to the more
common 4" size, it's likely made by PS&W; a fine worker,
it saw little use, minor grime; bottom:
https://www.supertool.com/forsale/may/t4.jpeg $65.00
MS6 Millers Falls No.4 ratcheting auger handle; a fine quality
tool that can ratchet left, right, or not at all, one handle
can be repositioned at a right angle to the other when
working confined areas; sound, as found condition, it can
be used as is; top:
https://www.supertool.com/forsale/may/t5.jpeg $75.00
MS7 Bailey Victor 8" try square; made when Leonard Bailey parted
ways over patent disputes, he created a new line of tools,
this is one; as found, it saw real use, the blade shows
scattered pitting, it will clean to look a lot better;
middle:
https://www.supertool.com/forsale/may/t5.jpeg $125.00
MS8 Patented February 28, 1888 rosewood handle hammer with
nickel plated head fit with two hard rubber faces; the idea
of Claes Svensson, it's a finely made tool with a nice
appearance; plating shows some loss, it saw normal use;
7 1/2" long; this is a nice tool; bottom:
https://www.supertool.com/forsale/may/t5.jpeg $125.00
MS9 Owner made try square with different plating; rosewood
handle is plated along the long edges, the brass detail
at the joint of steel and rosewood differs from typical;
3 1/2" blade has very light pitting, the image amplifies
that, it's overall in nice shape; top right:
https://www.supertool.com/forsale/may/t6.jpeg
https://www.supertool.com/forsale/may/t6a.jpeg $40.00
MS10 Book, Saw Filing, by Robert Grimshaw; 1912 hardcover edition,
the book is legendary for its detail; in fine shape, it
covers a wide range of saws; bottom left:
https://www.supertool.com/forsale/may/t6.jpeg $45.00
MS11 One dozen new old stock 6" slim taper saw files made by
Simonds; best quality, Simonds is no more, the building
demolished for an Amazon warehouse, not that there are
many of those around anywhere; bottom right:
https://www.supertool.com/forsale/may/t6.jpeg $90.00
MS12 Four calipers; three by Brown&Sharpe, one by Lufkin; inside
and outside pairs of 3" and 4", one with a small area of
cleanable rust, owner mark; top left four:
https://www.supertool.com/forsale/may/t7.jpeg $55.00
MS13 Pair of bench stops; simple and easy to use by turning a
recessed thumb screw to lift the stop at its hinge; mounts
flush to bench surface, a patented design, they look to be
new old stock; bottom left two:
https://www.supertool.com/forsale/may/t7.jpeg $65.00
MS14 Five non-standard diameters Irwin pattern twist augers; as
found, all sound workers, normal tarnish from sitting,
diameters of 1 1/16", 1 1/8", 1 1/4", 1 5/16", and 1 1/2"
(this one has some roughness where it fits in the chuck,
is still works as good as new); diameters over 1" are not
common, especially in 1/16" sizes; right group:
https://www.supertool.com/forsale/may/t7.jpeg $155.00
MS15 Four stout mortice/framing chisels by Union Hardware, a
fine quality Connecticut maker; barely used, perhaps new
old stock, widths of 1/4", 1/2", 3/4", and 1"; these
chisels could be bought sans handles, four older ones
are included, one fits well, others will need their dia-
meters reduced where they fit in the sockets; a good
working group; left four:
https://www.supertool.com/forsale/may/t8.jpeg $155.00
MS16 Atkins saw filer; clean and little used, it's a popular
jig to aid hand filing saws; all that's needed is a file,
and saw; right:
https://www.supertool.com/forsale/may/t8.jpeg $125.00
MS17 Unused Lie-Nielsen #97 1/2 small chisel plane in original
box and with packing; a small tarnish spot on the sole;
out of stock; left:
https://www.supertool.com/forsale/may/t9.jpeg $175.00
MS18 Unused, never unwrapped, Lie-Nielsen #60 1/2; out of stock;
right:
https://www.supertool.com/forsale/may/t9.jpeg $190.00
MS19 New old stock Starrett 12" combination square in original
box and with packing material; left:
https://www.supertool.com/forsale/may/t10.jpeg $110.00
MS20 New old stock Starrett 6" combination square in original
box and with packing material; right:
https://www.supertool.com/forsale/may/t10.jpeg $90.00
MS21 New old stock Robert Sorby bevel edge paring chisels in
original wood case and with all paperwork; made in 2016,
good quality, probably can be used as is; left:
https://www.supertool.com/forsale/may/t11.jpeg $160.00
MS22 Good worker cooper's adze with 2 3/4" edge; used to shape
stuff quickly, it can be used by any trade; as found, never
abused, head is firmly attached to the handle, it's not a
large size which is what's typically found; minor grime
from sitting; right:
https://www.supertool.com/forsale/may/t11.jpeg $85.00
MS23 E.A.Berg 1 1/4" bevel edge chisel with tang (not socket) for
the handle; less common pattern, best quality, decal remnants
on handle, it can be honed and used as is; top:
https://www.supertool.com/forsale/may/t12.jpeg $85.00
MS24 1 3/8" No.7 carving gouge by Pfeil; barely used; middle:
https://www.supertool.com/forsale/may/t12.jpeg $45.00
MS25 1 5/16" No.3 carving gouge by Pfeil; little used, some minor
tarnish; bottom:
https://www.supertool.com/forsale/may/t12.jpeg $45.00
MS26 Joiner's mallet with friction fit round lignum head; made
so it's impossible for the head to fly off during use, it's
a fine working example that can be used as is, it has a
manufactured appearance; 15" long, 3" diameter head that
shows some minor chipping around each face, an ancient
check (which lignum does then remains stable); this is
probably the Stanley #5; top:
https://www.supertool.com/forsale/may/t13.jpeg $135.00
MS27 Good worker side axe (for right hand use) by American Axe
Co. of Glassboro, PA; perfect for shaping, 6" edge, the
handle looks to be original with a new wedge in the kerf;
bottom:
https://www.supertool.com/forsale/may/t13.jpeg $95.00
MS28 Pair of useful tools; a Veritas 10" sliding bevel using the
Hold-Fast design patented in America long ago; and a brass
carving mallet with turned wooden handle; both little used
and ready to go out of the box; left two:
https://www.supertool.com/forsale/may/t16.jpeg $55.00
MS29 Clean Millers Falls No.1 spoke shave with most of the red
finish in the throat; free of the common filing done by
someone who doesn't realize that the cutter's bevel needs
to be more acute than standard; the most popular shave for
working curved edges; bottom right:
https://www.supertool.com/forsale/may/t16.jpeg $75.00
MS30 Lie-Nielsen #66 bronze beader; in the original box, never
used, out of stock; top:
https://www.supertool.com/forsale/may/t19.jpeg $300.00
MS31 Lie-Nielsen straight handle 15ppi dovetail saw in the
original box with figured maple handle; never used, long
out of of production; middle:
https://www.supertool.com/forsale/may/t19.jpeg $225.00
MS32 Lie-Nielsen dowel plate, unused in the original envelope;
bottom:
https://www.supertool.com/forsale/may/t19.jpeg $90.00
MS33 Lie-Nielsen left hand bronze #95 edge trimming block plane;
never used; top left:
https://www.supertool.com/forsale/may/t20.jpeg $490.00
MS34 Lie-Nielsen #103 bronze block plane, unused in the original
box, no longer offered, a tough one to find; top right:
https://www.supertool.com/forsale/may/t20.jpeg $385.00
MS35 Lie-Nielsen 1/2 rabbet plane; never used, in original box,
and still wrapped; finished by Lie-Nielsen (could be bought
as a kit), and long out of stock; bottom:
https://www.supertool.com/forsale/may/t20.jpeg $325.00
MS36 Starrett 4" double square; fine worker that saw little use,
some very minor tarnish spots on the 4R Grad rule; a very
popular tool for today's woodworkers; top right:
https://www.supertool.com/forsale/may/t21.jpeg $70.00
MS37 Lie-Nielsen #9 1/2 block plane; was not in production for a
long time, it's now out of stock; in original box, this one
saw some use and shows tarnish spots on the main casting,
those will easily polish; top left:
https://www.supertool.com/forsale/may/t22.jpeg $180.00
MS38 Well made anvil on metal base with tongs; anvil's top
measures 4", this is likely a paperweight as the base has
felt on the bottom and it weighs a fair bit given its size;
another item was fastened to the base, it's no longer there,
you can put whatever you wish there; top right:
https://www.supertool.com/forsale/may/t22.jpeg $125.00
MS39 William Bundy July 5, 1910 patent for an angle bisector;
an uncommon tool, it's stamped patent applied for and the
location of its inventor, Valparaiso, IN; in sound condition
with minor tarnish, a hard to find tool; bottom:
https://www.supertool.com/forsale/may/t22.jpeg $265.00
MS40 Very clean Peck's Patent ratcheting brace; 8" sweep suits
it well for general and finer boring; nearly all plating
remains, exotic wood head and grip, the ratchet is very
simple, with two pawls that are raised/lowered to set the
ratchet left or right or not at all; left:
https://www.supertool.com/forsale/may/t28.jpeg $75.00
MS41 Good cooper's brace with a single 1/4" spoon bit secured in
the metal jaws; much nicer than usual condition, these got
bored to death by coopers bored to death doing the same thing
day after day; right:
https://www.supertool.com/forsale/may/t28.jpeg $115.00
MS42 Joiner's mallet with stuffed brass head; the common style
used in England and in the common condition of polished
brass; simple three piece construction, it can come apart
(though not while in use) when the wood stuffing needs
replacing after junior uses it to smash ants, grasshoppers,
and various other insects on the cement sidewalk; fortunately,
junior hasn't done that to this one, it can bang wood as
is; left:
https://www.supertool.com/forsale/may/t29.jpeg $145.00
MS43 Combination brace and drill with Peck's Patent ratcheting
chuck; very clean, and much harder to find than the Millers
Falls models, the crank and gear can be removed when doing
regular boring; nickel plated, fit with rosewood, 10" sweep,
it's a nice looking tool, owner stamped his name in the frame;
right:
https://www.supertool.com/forsale/may/t29.jpeg $185.00
MS44 Lie-Nielsen left hand #140 skew rabbet; minor tarnish and
grime, it saw very little use; out of production (and the
right hand is still out of stock); much less common than
the standard issue; top left:
https://www.supertool.com/forsale/may/t30.jpeg $565.00
MS45 Lie-Nielsen #85 cabinet scraper with tilting handles; very
minor tarnish, dusty from sitting in a working shop; now
out of stock and likely to cost more money when it re-
appears; top right:
https://www.supertool.com/forsale/may/t30.jpeg $285.00
MS46 Lie-Nielsen Boggs spoke shave with flat sole; used a couple
times and forgotten, very minor tarnish on the cutter;
bottom:
https://www.supertool.com/forsale/may/t30.jpeg $150.00
MS47 Lie-Nielsen #62 low angle jack plane in its original box;
looks unused with some minor storage tarnish; top:
https://www.supertool.com/forsale/may/t42.jpeg $270.00
MS48 Lie-Nielsen #5 1/2 oversize jack plane; carefully used,
some tarnish, nothing that prevents it from being a fine
worker, it's out of stock; bottom:
https://www.supertool.com/forsale/may/t42.jpeg $410.00
MS49 Never used, nor unwrapped, in the original box Lie-Nielsen
tapered dovetail saw with figured maple handle (no longer
offered); top:
https://www.supertool.com/forsale/may/t43.jpeg $195.00
MS50 Same as previous but standard dovetail saw; never unwrapped
and in original box; figured maple handle; bottom:
https://www.supertool.com/forsale/may/t43.jpeg $195.00
MS51 Never used, nor unwrapped, in the original box Lie-Nielsen
carcass saw with figured maple handle; top:
https://www.supertool.com/forsale/may/t44.jpeg $195.00
MS52 Never used, nor unwrapped, in the original box Lie-Nielsen
16" rip tenon saw with figured maple handle, and like the
others, it has the California warning paper that you may
be exposed to lead, so caveat emptor (that California!);
bottom:
https://www.supertool.com/forsale/may/t44.jpeg $275.00
MS53 Infill casting with bronze lever cap having a heart shape
cutout; never finished, it's a blank canvas to create your
masterpiece, a proper width parallel iron by Sorby is in-
cluded; 10" long, which is an unusual length; not a modern
creation, it's from the era when infill planes ruled the
bench; left:
https://www.supertool.com/forsale/may/t45.jpeg $165.00
MS54 Lie-Nielsen #4 bronze smoothing plane with extra frog; one
that saw use, though carefully, there's tarnish on the
iron; out of stock, and when it isn't, it's a short
supply that goes quickly; a worker; right:
https://www.supertool.com/forsale/may/t45.jpeg $515.00
MS55 Set of boxwood drafting rules with beveled edges in the
original hinged wooden case; five 12" and five 2", each
with different scales, they are in fine, little used con-
dition; made in England, though no maker mark; top:
https://www.supertool.com/forsale/may/t46.jpeg $115.00
MS56 Record #151 flat sole spoke shave; new old stock, identical
to the Stanley, a popular design, all it needs is a honing;
bottom left:
https://www.supertool.com/forsale/may/t46.jpeg $65.00
MS57 Fancy Preston nickel plated spoke shave with 1 1/2" cutter
and curved sole; most plating remains, a very nice example;
bottom right:
https://www.supertool.com/forsale/may/t46.jpeg $110.00
MS58 Unique shooting board with the plane a Spiers dovetailed
shoulder plane that an owner added a side handle a la the
Record T5; 1" wide, dovetailed steel, with rosewood stuff-
ing, mouth is as fine as the day it was made; works miters
left and right, perfect for smaller work; top:
https://www.supertool.com/forsale/may/t47.jpeg $265.00
MS59 Starrett universal bevel in its original case; clean, and
earlier production with 1921 patent date; best quality;
top left:
https://www.supertool.com/forsale/may/t49.jpeg $65.00
MS60 Group of six clean Starrett tools, all ready to use as is;
a 4" precision level with rotating vial cover; a 2" try
square with very minor tarnish; a #270 tapered thickness
gauge in decimal and metric increments; a #134 nickel
plated cross test level; an 8" lock joint inside caliper;
and a 4" hermaphrodite caliper; top right:
https://www.supertool.com/forsale/may/t49.jpeg $110.00
MS61 Five clean boxwood handle cabinetmaker's screw drivers by
Marples; all ready to use, lengths from 6 1/2" to 14";
bottom:
https://www.supertool.com/forsale/may/t49.jpeg $115.00
MS62 New condition Yankee No.1545 drill; only apology is some
loss to the decal, it's the pinnacle of drills with its
five position selector, it has the original side handle
with screw driver tip; a mechanical work of art; top:
https://www.supertool.com/forsale/may/t50.jpeg $185.00
MS63 10" drawknife that can be honed and used as is; super clean,
by Dunlap, it's guaranteed to be a great worker; bottom:
https://www.supertool.com/forsale/may/t50.jpeg $70.00
MS64 Unused Lie-Nielsen #9 miter plane with side handle; with
the original box and packing material, it was unwrapped to
examine and then put away; long out of stock; top:
https://www.supertool.com/forsale/may/t51.jpeg $975.00
MS65 Unused and never unwrapped Lie-Nielsen #73 shoulder and
rabbet plane; bottom:
https://www.supertool.com/forsale/may/t51.jpeg $315.00
MS66 Pair of clean nickel plated wrenches; a 4 1/2" Gem with
Tower and Lyon initials; and a 3" Mossberg Junior No.1 that
also functions as a caliper to measure in inches and metric
whatever; bottom two:
https://www.supertool.com/forsale/may/t52.jpeg $125.00
MS67 Three unused Veritas sharpening guides, in the original
packaging, one has cracked plastic packaging, one may have
been used once; top three:
https://www.supertool.com/forsale/may/t53.jpeg $110.00
MS68 Veritas #112 scraper plane; used a few times, a fine quality
plane; bottom:
https://www.supertool.com/forsale/may/t53.jpeg $185.00
MS69 Record 043 small plough plane; all original parts, little
used, a time-tested design that's as popular today as it
was when first offered; top:
https://www.supertool.com/forsale/may/t54.jpeg $160.00
MS70 Bronze chamfer guides in the original box; designed to fit
on a common drawknife, they are Chandler's Patent of July
14, 1885; sound workers with darker patina from sitting
idle for probably 100 years; bottom right:
https://www.supertool.com/forsale/may/t54.jpeg $75.00
MS71 3/8" mortice chisel by Mitchell&Co.; the pigsticker pattern,
quality Sheffield steel, cleaner than usual condition, with
typical stable handle checks; top:
https://www.supertool.com/forsale/may/t55.jpeg $55.00
MS72 7/16" mortice chisel; barely used, Sheffield product but with
no maker mark; stable handle check; pigsticker pattern;
second from top:
https://www.supertool.com/forsale/may/t55.jpeg $55.00
MS73 1/4" mortice chisel by Marsden, one of countless Sheffield
makers; owner mark in handle, a fine worker; pigsticker
pattern; second from bottom:
https://www.supertool.com/forsale/may/t55.jpeg $60.00
MS74 1/8" mortice chisel; the narrowest of the standard set of
pigstickers, Sheffield made, but no maker/retailer mark,
an owner mark in the handle, it saw little use; bottom:
https://www.supertool.com/forsale/may/t55.jpeg $60.00
MS75 Brown&Sharpe No.250 inside micrometer; barely used, in the
original case and with the wrench; use it on your bench
planes to make sure the mouth is a uniform width before you
try to pull a mile long shaving, somewhere there's a blog
that claims you need to do this (or maybe not); top:
https://www.supertool.com/forsale/may/t56.jpeg $60.00
MS76 Different drill index that has many leaves that fold out;
looks to be manufactured but no name spotted on it; in fine
shape, it's the NBC peacock of drill indices; bottom left:
https://www.supertool.com/forsale/may/t56.jpeg $85.00
MS77 Pair of German silver folding rules each with a sliding
caliper; patented January 8, 1907, they are the idea of
Edward Johnson of Grand Forks, ND; both stamped with his
surname, the 12" #46 and 6" #46, they both have an accurate
protractor at the hinge; both in fine, little used con-
dition; bottom right:
https://www.supertool.com/forsale/may/t56.jpeg $85.00
MS78 Decorative smith-made traveler with open twist handle; not
the typical pattern, 17" long, good age, a talented smith
made this one, the open handle allows quicker cooling of
the grip when used near a heat source, it was likely used
by a wheelwright; bottom:
https://www.supertool.com/forsale/may/t57.jpeg $125.00
MS79 Goodell-Pratt No.485 hand cranked grinder; a great quality
tool that needs a drop of oil, it has the original rest,
the bolt to secure the handle is replaced; a few cranks and
it makes many more revolutions, it's the tool version of a
perpetual motion machine; left:
https://www.supertool.com/forsale/may/t59.jpeg $185.00
MS80 Unopened set of Workzone bevel edge paring chisels; Paul
Sellers says these are great quality and fine workers
though I've never used one; made 2018; right:
https://www.supertool.com/forsale/may/t59.jpeg $65.00
MS81 I.Sorby (with Punch logo) 1/2" lock mortice chisel with box-
wood handle, can be honed and used to dig out deep mortices;
middle:
https://www.supertool.com/forsale/may/t67.jpeg $165.00
MS82 Plumb hatchet with what's likely its original leather sheath;
little used, forging is free or rust, camera flash makes it
look shinier than it is, it can be sharpened and used as is;
sheath shows wear; bottom:
https://www.supertool.com/forsale/may/t67.jpeg $60.00
MS83 Three Japanese mortice chisels; don't know the brand, they
are unused; widths of 1/4", 3/8", and 1/2"; can be used as
is after honing; left three:
https://www.supertool.com/forsale/may/t68.jpeg $95.00
MS84 Three clean Pfeil Swiss Made carving chisels; all gouges,
a 3/4" No.5, a 1" No.8, and 1 3/8" No.3; right three:
https://www.supertool.com/forsale/may/t68.jpeg $130.00
MS85 Dovetail gauge by Sterling Tool Works; steel and brass, it
lays out 1:4" dovetails; top left:
https://www.supertool.com/forsale/may/t69.jpeg $50.00
MS86 New old stock #10 and #10 1/2 iron and cap iron by Hock;
bought long ago; finding original unused Stanley irons for
these planes is not easy; top middle:
https://www.supertool.com/forsale/may/t69.jpeg $85.00
MS87 Same as previous, but 2 5/8" iron for #8 planes; top right:
https://www.supertool.com/forsale/may/t69.jpeg $65.00
MS88 Swan 6" drawknife; best quality, minor tarnish, can be honed
and used as is; middle:
https://www.supertool.com/forsale/may/t69.jpeg $80.00
MS89 Cleveland Twist Drill Set #58 in its original metallic case
with drill index, the larger sizes are present, and in little
used condition, the smaller sizes are MIA, but stray twist
drills are easy to find, it's uncommon to find them in a
case like this that still has its index; left:
https://www.supertool.com/forsale/may/t70.jpeg $115.00
MS90 Clean and matching set of Irwin pattern twist augers in the
original wooden case; sizes 1/8" to 1" in 1/16" increments,
they are the best pattern for general boring; all can be
used as is, one latch is missing on the case; right:
https://www.supertool.com/forsale/may/t70.jpeg $135.00
MS91 Millers Falls bow/frame saw; a rugged design that uses a
threaded rod to tension the 12" blade, it's finely made
tool:
https://www.supertool.com/forsale/may/t71.jpeg $110.00
MS92 Seven center bits and a countersink; the pattern used for
decades prior to twist augers appearing; can fit nearly
every brace, widths from 5/16" to 1"; left group:
https://www.supertool.com/forsale/may/t71.jpeg $45.00
MS93 21 gimlets of various sizes and condition; commonly hand
turned with a tool handle, they also can fit a brace; right
group:
https://www.supertool.com/forsale/may/t71.jpeg $75.00
MS94 Lie-Nielsen #140 right hand skewed block plane; long out of
stock, this one saw careful use and only needs a honing; top
right:
https://www.supertool.com/forsale/may/t72.jpeg $390.00
MS95 Record #151 curved sole spoke shave; used once and put away;
as good as the Stanley; bottom:
https://www.supertool.com/forsale/may/t72.jpeg $65.00
MS96 Delicate double face hammer for finer work - watchmaking,
jewelry making, etc.; circular nickel plated head with two
flat faces, 6" long, barely used, unique handle tapers as
it nears the head; bottom:
https://www.supertool.com/forsale/may/t76.jpeg $75.00
MS97 Nickel plated Standard Tool Co. drill index; holds numbers
1 through 60, it looks unused; bottom:
https://www.supertool.com/forsale/may/t77.jpeg $75.00
MS98 Clean and barely used Brown&Sharpe No.2 0"-1" micrometer in
its original case; with standard and wrench, great quality;
top left:
https://www.supertool.com/forsale/may/t78.jpeg $55.00
MS99 Clean and barely used Brown&Sharpe depth gauge with 5"
scale; in original case, fine quality; top right:
https://www.supertool.com/forsale/may/t78.jpeg $55.00
MS100 Dozens of fine cut files for metal; found in a machinist's
chest, sound workers, a variety of patterns and lengths;
bottom:
https://www.supertool.com/forsale/may/t78.jpeg $95.00
MS101 Unique patternmakers dividers with several pairs of attach-
ments along with six hemispherical legs for referencing off
depressions; owner made, very well done, and in a french fit
wooden case that stores everything neatly and securely; top:
https://www.supertool.com/forsale/may/t79.jpeg $115.00
MS102 Bridge City SS-2 saddle square; barely used, one of the
company's most popular tools; bottom left:
https://www.supertool.com/forsale/may/t79.jpeg $90.00
MS103 Same as previous but SS-4 longer saddle square; some minor
tarnish; bottom right:
https://www.supertool.com/forsale/may/t79.jpeg $115.00
MS104 Lie-Nielsen #97 large chisel plane in bronze; long out of
production, barely used, some minor tarnish; top:
https://www.supertool.com/forsale/may/t80.jpeg $390.00
MS105 Group of the largest diameter gimlets I've seen; eight of
them, most barely used, they have no lead screw like the
smaller ones do as most gimlets are started by hand, these
will need a brace to use them; largest diameter of 3/4";
two others, showing grime and use are tossed in for free
making a total of 10; bottom:
https://www.supertool.com/forsale/may/t80.jpeg $115.00
MS106 Gage Tool Co. smoothing plane; a clever and popular design
with its stay set design, it predates Sargent's offering,
Stanley bought Gage so they could compete with Sargent; as
found, with normal wear, it has plenty of life left in it,
the tote is free of the common damage where the horn
shears off; a worker; top left:
https://www.supertool.com/forsale/may/t83a.jpeg $75.00
MS107 Whitney style eggbeater drill; remnants of the original
colorful paint, free of damage, simple chuck works fine,
it's like a larger version of the Millers Falls No.4;
top right:
https://www.supertool.com/forsale/may/t84.jpeg $110.00
MS108 2" framing chisel with bevel back; made by Douglas Mfg.Co.,
it's been cleaned, the back polished, and has a proper
replacement handle, it can be honed and used as is; top:
https://www.supertool.com/forsale/may/t85.jpeg $85.00
MS109 Lie-Nielsen 3/8" fishtail chisel; probably unused; bottom:
https://www.supertool.com/forsale/may/t85.jpeg $110.00